Introduction:
-The tester is to connect with the 12V 13-pin
Euro-type socket.
- It can also connect with 7 pin socket through a
13-7 pin towing adaptor.
- It works for MOT testing of class 4, 5, and 7.
- The cable is long enough for user to do the test
while sitting in the vehicle.
- The tester can also do self-test (not work for 7 pin
socket), 12V power check, ignition,
reversing light.
Operation:
1.) Connect the tester with the vehicle’s towing socket.
Take care to line up the male and female socket.
Twist the out plug ring clockwise to lock the plug.
2.) If the 12V power line of the socket is working correctly,
the “12V CONTINUOUS” indication will light up.
3.) Press the “Test” to check the tester circuit and LED
indication.
4.) Turn the ignition to “ON” position, do not start the
vehicle’s engine. The “12V IGNITION” indication
shall light up.
5.) For MOT test, please do in turns:
-Switch on left and right hand light.
-Switch on the side light.
-Switch on the fog light.
-Depress the food brake pedal.
6.) User can also check the reverse light by “REVERSE” indication.
7.) To remover the tester after the test, please twist the out plug
ring anti-clockwise to unlock the plug.
Packing: Color Box