Compressor Master Kit (3 & 4 hole pitch)
This kit allows the professional disassembling and
assembling of all self adjusting clutches (SAC) e.g.
During the disassembling and assembling operations, the
pre-tightening of the pressure plate is required in order
clutch deformations
Laser marking logo on 10-pc parts.(Please kindly review the
below words)
All in Black Blow Mold Case without Emboss Logo
Packing: Back Card & Color Label + PE shrink
Contents:
1. Clamping tool x 2pcs: For 6 or 8 locking holes.
2. Face spanner.
3. Compression strut.
4. Clutch mandrel set (BMW):
a. 15mm x 23mm
b. 15mm x 26.5mm
c. 15mm x 28mm
d. 15mm x 32.5mm
e. 15mm x 32.5mm (sleeve)
f. 15mm x 34mm
5. Clutch resetting tool.
6. Handle for clamping tool.
7. Clutch centering tools:
a. Centering handle / Handle adapter.
b. Clamping cone 15-22mm / 22-28mm
c. Centering pin 12/14/15/16/17/18/19mm
8. Knuled nuts for threaded bolts (4 pcs)
9. Three sets of 4 threaded bolts: M6 x 1.0 / M7 x 1.0
M8 x 1.25